Post by MultiplayerX on Aug 27, 2008 13:31:49 GMT -8
------------------------------------------------
01 doors
-see seperate list
----------------
02
unknown
format:
00000002
?? ----------------
03 standard object
almost all objects can be set to this type
example:
00: 01 00 00 03 00 60 27 33 00 00 01 E1 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
SSSS 0003 oooo pxxx mm ii *f rr 00 00 ii 00
00: scale as a hex percent. ie: 03.80 is 3 1/2
02: current state. 80 is destroyed, but kinda stupid setting it.
04: object value
06: preset value. 0000+ or 2710+ to use standard presets.
FFFF, FFFE...FFxx to set this object inside the previous object. (solo only)
if control nibble 4x is set at 0xB, then this number matches the ID of a guard
08: binary flags:
0000xxxx indicates no control features set
0001xxxx indicates left-handed normal pickup or opposite alignment
0010xxxx indicates object in motion or special function is activated
1000xxxx indicates right-handed gun assignment
xxxx0000 indicates normal preset, or beginning/end of chain
xxxx0001 indicates embedded crate or other object, creating a chain of boxes, for example
(embedded objects should be smaller than parent...)
09: flags:
1000xxxx
0100xxxx
0010xxxx unsure - used on Silo DAT tape
0001xxxx
xxxx1000
xxxx0100 allows object pickup (chr_name objects only)
xxxx0010 invincibility
xxxx0001
0A: binary flags:
1000xxxx indicates contained within another object (forward or back # objects = preset value)
0100xxxx indicates object does not use normal presets but is assigned to guard #preset
0010xxxx
0001xxxx think this sets object to absolute position. (similar to 2xxx type)
xxxx1000 something to do with free-standing glass (glass walls)
xxxx0100
xxxx0010 seems to align image to preset values for glass
xxxx0001 force collisions (2xxx presets, mostly)
0B: binary flags:
0xxx presets:
00000000 default, on ground
xxxx0001 forced to ground
xxxx0010 room upper limit, rotated y 90 degrees. top faces direction, front faces up
xxxx0100 room upper limit, upside-down
xxxx1000 room upper limit, right side up
2xxx presets:
xxxx0001 normal placement
xxxx0010 rotated y 90 degrees. top faces direction, front faces up. (use on obj 68-6B)
xxxx0100 upside-down
xxxx1000 no use? looks like default.
0001xxxx scale object to fit completely within preset bounds
0010xxxx x set to preset bounds
0100xxxx y set to preset bounds
1000xxxx z set to preset bounds
0D: invisible! set to 08. can't shoot, but can hit with rockets, bugs, etc. not counted as a hit though...
0E: 4x = invulnerability. set to 40 to only allow damage from explosives
x2 = explode on contact. set to 02 for land mines, etc
0F: drops to ground when destroyed if set to 02 (2xxx presets)
74: 2 bytes. amount of health. multiple of 00E4 (approx 1 gunshot). glassware is 000A
examples of usage:
invincible crate:
00: 01 00 00 03 00 57 00 10 00 02 01 E1 00 00 00 00 ...
crate resistant to all but explosives:
00: 01 00 00 03 00 57 00 10 00 00 01 E1 00 00 40 00 ...
dropped by a guard when killed
00: 01 00 00 03 00 57 00 10 00 00 40 00 00 00 00 00 ...
inside previous object
00: 01 00 00 03 00 57 FF FF 00 00 80 00 00 00 00 00 ...
several objects dropped by parent object (only first 0x10 are given)
#1 01 00 00 03 00 52 00 2C 00 00 01 01 00 00 00 00 ... parent
#2 00 99 00 03 00 57 FF FF 00 00 80 01 00 00 00 00 ... object 1 dropped by parent
#3 00 99 00 03 00 57 FF FE 00 00 80 01 00 00 00 00 ... object 2 dropped by parent
#4 00 99 00 03 00 57 FF FD 00 00 80 01 00 00 00 00 ... object 3 dropped by parent
embedded chain of objects, f/ caverns (only first 0x10 are given):
all are linked forward, not backward
#1 01 00 00 08 00 BC 00 02 10 00 80 00 00 00 00 00 ... within monitor 1 (#3)
#2 01 00 00 08 00 BC 00 02 00 00 80 00 00 00 00 00 ... within monitor 2 (#4)
#3 01 00 00 0A 00 4B 00 02 11 00 80 01 00 00 00 00 ... monitor 1, within box 1 (#5)
#4 01 00 00 0A 00 4B 00 01 11 00 80 01 00 00 00 00 ... monitor 2, within box 1 (#5)
#5 00 66 00 03 00 52 00 01 01 00 80 01 00 00 00 00 ... box 1, within box 2 (#6)
#6 00 99 00 03 00 52 00 01 01 00 80 01 00 00 00 00 ... box 2, within box 3 (#7)
#7 00 CC 00 03 00 52 00 01 01 00 80 01 00 00 00 00 ... box 3, within box 4 (#
#8 01 00 00 03 00 52 00 9B 00 00 01 01 00 00 00 00 ... box 4
padlocking a door:
lock 01 00 00 03 00 3F 27 5B 01 00 00 08 00 00 00 02 ...
handle1 00 00 00 26 FF FF FF FE FF FF FF FF 00 00 00 00
handle2 00 00 00 26 FF FF FF FC FF FF FF FE 00 00 00 00
then doors...
DAT pickup
02 00 00 03 01 10 00 3C 01 24 40 00 00 00 00 00 ...
+ pickup type rename
00000025 FFFFFFFF 00000049 ...
key holder (bunker2)
00: 01 00 00 03 01 26 27 5B 00 00 10 E8 00 00 01 00
note: first 0x80 is standard for most types
any object can be assigned to be dropped by a guard.
----------------
04 key
keys, floppy disks, etc.
0x80 std, + key
example
00: 01 00 00 04 00 56 00 39 00 00 40 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 06
80: Always unique. value probably is used in the big block of stuff as a key value or inventory value...
silo 04, type 51
08, type 51
10, type 51
1c, type ?
note: always followed traditionally by a type 25-rename block.
----------------
05 alarm
00-01, most other objects will also work
sounds an alarm when activated
0x80 std
01 00 00 05 00 01 27 56 00 00 00 02 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
----------------
06 surveillance camera
0018 only
(autoguns can be exchanged for these, but they probably won't look right)
0x80 std + some funny stuff
00: 01 00 00 06 00 18 27 38 00 00 00 02 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 57 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15 55
D0: FF FF EA AB 00 00 00 00 00 00 00 00 00 00 00 F2
E0: 00 00 00 00 00 00 00 00 FF FF FF 9C
0x82 2byte preset used to *center* camera. This is the default middle position. all rotation data is applied to this angle.
*note: below seem like typical rotation values. user might have ot fiddle with it a bit...
0xCC 2byte how far camera can rotate upward. positive value (N/A)
0xCE 2byte how far camera can rotate left from preset. positive value.
0xD0 2byte how far camera can rotate downward. negative value. (N/A)
0xD2 2byte how far right it can rotate. negative value.
0xDE 2byte speed. how fast the camera turns
0xE8 2byte detection arc up/down from current position
0xEA 2byte detection arc left/right from current position
This sets up the line of sight. When bond is in the detection arc for five seconds, it triggers the alarm. Set this high enough and the camera can look in teh opposite direction but still see you.
FFFF,FF9C are the default values
note: for free rotation left/right, set both to 0000
note: vertical rotation should be set to default. Camera can't move this way.
defaults should be 0000xxxxFFFFxxxx
----------------
07 ammo clip
0079-0086 specifically, though most objects will work
0x80 std
then 000000## which is type of ammo on pickup
adds default amount of ammo of given type number
can add ammo of any type, not just the first 13
example:
00: 01 00 00 07 00 7E FF FF 00 00 80 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 01
80: type of ammo on pickup. Adds default pickup ammount for that type
(same as amount of ammo on gun pickup)
note: this type is almost exclusively found inside other objects
----------------
08 weapon pickup
weapon objects specifically, or really most objects
all 08 types are invincible
0x80 contains some added tags
then ??FFFFFF 00000000
?? is replaced with inventory pickup value, or F# for multiplayer value.
next byte is also replaced if a linked weapon
normal example:
00: 02 00 00 08 01 4D 00 2A 00 00 00 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 58 FF FF FF 00 00 00 00
inventory addition on pickup:
80: 58 FF FF FF 00 00 00 00
multi example:
80: ...F0 FF FF FF 00 00 00 00
weapons are F0 - F7, for the 8 weaopns in each weapon set
linked guard weapons: (xenia in jungle)
note: 0x8 settings 80+90 are used to designate right (80) and left (90) handed weapons that are EQUIPPED
right
00: 01 00 00 08 00 C5 00 00 80 00 40 00 00 00 00 00 ...
80: ...0E FF FF FF 00 00 00 00
left
00: 01 00 00 08 00 B9 00 00 90 00 40 00 00 00 00 00 ...
80: ...18 FF FF FF 00 00 00 00
linked pickups within a crate
note: 0x8 settings 00+10 are used to designate right (00) and left (10) handed weapon PICKUPS only
left
00: 01 00 00 08 00 BC 00 02 10 00 80 00 00 00 00 00 ...
80: ...0D FF FF FF 00 00 00 00
right
00: 01 00 00 08 00 BC 00 02 00 00 80 00 00 00 00 00 ...
80: ...0D FF FF FF 00 00 00 00
---------------
09 guards
use head/body values
example:
00000009 0000 0000 0004 00 02 FFFFFFFF 03E8 00 64 0000 FFFF 00000000
path example:
00000009 0017 006E 0025 04 01 FFFFFFFF 02EE 00 32 0000 FFFF 00000000
format:
00000009 00ii pxxx 00bb !! aa FFFFFFFF hhhh 00 zz 0000 FFFF 00000000
00ii index number. used to link hats/weapons
pxxx preset position
00bb body
!! 04 if walking on a path, 00 otherwise
aa animation/action
FFFFFFFF
hhhh health
00
zz multiple of 16... accuracy/reaction time?
0000 I've also seen 0004...
FFFF head. FFFF is random, or set to distinct head if need be
---------------
0A single monitor display
use the value of a object with a viewing pane (consoles, etc)
4D is specifically dedicated as a stand-alone viewscreen
0x80 std
then, fill to 0xF0
00000000 FFFFFFFF FFFFFFFF 000000##
## is animation sequence.
00: 01 00 00 0A 00 4B 00 02 11 00 80 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0: 00 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 10
if set to hanging rack:
preset remains at FFFF for all attached monitors
0xF4 is decremented 1 for each subsequent monitor (like you would normally to preset)
F8 is changed from FFFFFFFF to long value for that monitor. ie. 00000000, 00000001, etc.
***see type 0C for example of proper notation
---------------
0B multiple-screen displays
use an object with multiple viewing panes (ie. double consoles)
4E is dedicated as a stand-alone multi-viewscreen
0x80 std
last line... 10141414
four values, each one a different possible screen
can display up to four unique screens
first is primary, others are overlayed
00: 01 00 00 0B 00 4E 27 3C 60 00 00 62 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 10 14 14 14
---------------
0C hanging monitor rack
4C !only!
must be followed by set number of 0A types, per example
0x80 std except 0x0B sets number of monitors to hang on rack
example:
01 00 00 0C 00 4C 00 33 00 00 00 04 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
must be followed by number of 0A-type presets set at 0xB
example of 0A subobjects, first and last lines only given
00: 01 33 00 0A 00 4B FF FF 10 00 00 00 00 00 00 00 ...
F0: 00 00 00 00 FF FF FF FF 00 00 00 00 00 00 00 xx
00: 01 33 00 0A 00 4B FF FF 10 00 00 00 00 00 00 00 ...
F0: 00 00 00 00 FF FF FF FE 00 00 00 01 00 00 00 xx
00: 01 33 00 0A 00 4B FF FF 10 00 00 00 00 00 00 00 ...
F0: 00 00 00 00 FF FF FF FD 00 00 00 02 00 00 00 xx
00: 01 33 00 0A 00 4B FF FF 10 00 00 00 00 00 00 00 ...
F0: 00 00 00 00 FF FF FF FC 00 00 00 03 00 00 00 xx
---------------
0D autoguns
autogun models only
(0062,0124,012B only)
0x80 std + extra info
00: 01 00 00 0D 00 62 00 27 00 00 00 04 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 71 00 00 00 00 00 02 00 00 FF FE 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 DA 00 0A 00 00 00 00 00 00
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0: 00 00 00 00 00 00 00 00
0x82 2byte preset used to *center* gun. aims at this when it doesn't aim at you.
*note: below seem like typical rotation values. user might have ot fiddle with it a bit...
0x88 2byte how far gun can rotate upward. positive value
0x8A 2byte how far the gun can rotate left from preset. positive value.
0x8C 2byte how far the gun can rotate downward. negative value.
0x8E 2byte how far right it can rotate. negative value.
0xA6 2byte speed. how fast the turret turns
0xA8 2byte distance before deactivating. same as clipping/model distances
note: for free rotation left/right, set both to 0000
note: vertical rotation must be set or any non-ground autogun can't find Bond
defaults should be 0000xxxxFFFFxxxx or 0002xxxxFFFExxxx. it doesn't really matter much
last note: this data is also shared by cameras. They expand on this basic stuff.
---------------
0E Link Pickups
any chr_name pickup
format:
0000000E xxxxxxxx yyyyyyyy
x # objects to weapon pickup 1
y # objects to weapon pickup 2
example:
00 00 00 0E FF FF FF FE FF FF FF FC
might be possible to double weapons with this...
just to remove weird glitchiness of pickups in hard-to-reach areas
---------------
0F
unknown
format:
0000000F
---------------
10
unknown
format:
00000010
---------------
11 hat
D4-DF specific, possibly other objects as well
0x80 std. always assigned to a guard!
example:
00: 01 00 00 11 00 D8 00 0B 00 00 40 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
note: 0x6 is always the id of the guard wearing the hat.
0xA is always 40, indicating the hat is equipped.
---------------
12
always follows guard information
format:
00 00 00 12 00 00 ?? ?? 00 00 00 ??
---------------
13 switch
links player interaction between objects
interact with controlling object to open/close controlled door, for example
00000013 xxxxxxxx yyyyyyyy 00000000
x # objects to controlling object
y # objects to controlled object
examples:
01 00 00 0B 01 50 27 66 00 02 01 02 00 00 08 00
00 00 00 13 FF FF FF FF FF FF FF FD 00 00 00 00
01 00 00 0B 01 50 27 67 00 02 01 02 00 00 08 00
00 00 00 13 FF FF FF FF FF FF FF FB 00 00 00 00
01 00 00 0B 01 50 27 68 00 02 01 02 00 00 08 00
00 00 00 13 FF FF FF FF FF FF FF FA 00 00 00 00
01 00 00 0B 01 50 27 69 00 02 01 02 00 00 08 00
00 00 00 13 FF FF FF FF FF FF FF F8 00 00 00 00
used to link to these two doors:
01 00 00 01 00 B2 00 13 40 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 F3 33 00 01 00 00 00 00 00 10
00 00 00 10 00 00 00 CC 00 0C 00 00 00 00 00 80
00 00 05 DC 00 00 00 03 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 01 00 B3 00 15 40 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 C0 00 00 00 C0 00 00 00 00 51
00 00 00 51 00 00 02 22 00 00 00 04 00 00 00 00
00 00 05 DC 00 00 00 03 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
---------------
14 ammo box
0003-0007 specifically, although other objects will work
normal 0x80
then 13 sets of FFFF ####, where # specifies amount of ammo
example:
00: 00 99 00 14 00 05 00 31 00 00 00 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: FF FF 00 01 FF FF 00 02 FF FF 00 03 FF FF 00 04
90: FF FF 00 05 FF FF 00 06 FF FF 00 07 FF FF 00 08
A0: FF FF 00 09 FF FF 00 0A FF FF 00 0B FF FF 00 0C
B0: FF FF 00 0D
ammo types are:
1 9mm Ammo
2 (beta) also 9mm Ammo
3 Rifle Ammo
4 Shotgun Cartridges
5 Hand Grenades
6 Rockets
7 Remote Mines
8 Proximity Mines
9 Timed Mines
A Throwing Knives
B Grenade Launcher Rounds
C Magnum Rounds
D Golden Bullets
note: in multiplayer, ammo amounts and types are set based on last defined weapon.
set all amounts to zero on multiplayer (unless doing something really crazy...)
---------------
15 body armour
0072 & 0073 specifically, although most objects will work
normal 0x80,
then AAAA.aaaa 00000000
A.a is a hex percent, like 00028000, which is 2 1/2 times normal BA
example:
00: 01 80 00 15 00 73 00 00 00 00 00 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 01 00 00 00 00 00 00
---------------
16 tag object
target object can be manipulated or read via this tag.
00000016 xxxx#### 00000000 00000000
xxxx ID number used for this block.
#### number of objects forward (0001, 0002, etc) or backward (FFFF, FFFE, etc) to target block
______________
17 create mission objective
00000017 000000ii 0000TTTT 0000000*
00000017 start objective
000000.. objective number. just an ordered list, probably doesn't even use it
0000TTTT text to display. usually from stage text, but could be any loaded text bank
0000000* minimum difficulty: 0=agent, 1=secret agent, 2=007 agent
______________
18 end objective
...00000018
end objective
______________
19 destroy object
00000019 0000xxxx
xxxx value of corresponding 000000016 preset preceeding object to be destroyed
______________
1A complete if return true
0000001A xxxxxxxx
objective is completed if value given is equal to return from block data type 9A
______________
1B failed if return true
0000001B xxxxxxxx
objective is failed if value given is equal to return from block data type 9A
______________
1C collect object
0000001C 0000xxxx
xxxx value of corresponding 000000016 preset preceeding object to be collected
______________
1D deposit object (no target)
0000001D 0000xxxx
xxxx value of corresponding 00000016 preset preceeding object to be deposited
______________
1E photograph object
0000001E 0000xxxx 00000000 00000000
xxxx value of corresponding 00000016 preset preceeding object to photograph
______________
1F
? modifier 0000001F ...
______________
20 enter room
00000020 0000xxxx 00000000 00000000
xxxx preset within target room
______________
21 deposit object in room
00000021 000000xx 000000yy 00000000 00000000
xx weapon index number of object to be thrown
yy preset within target room
______________
22 copy item (modifier)
00000022 ...
use key analyzer on following objective
---------------
24 gas-releasing object
when destroyed, the stage fills with toxic gas
same as std 03 type.
---------------
25 rename function
renames inventory object
example:
00: 00 00 00 25 FF FF FF FF 00 00 00 51 00 00 0C 3A
10: 00 00 0C 3B 00 00 0C 3C 00 00 0C 3D 00 00 0C 3E
20: 00 00 00 00 00 00 00 00
04: target objects forward/back. if zero, affects all instances of that one object in inventory
08: inventory value to alter
0C: watch main top
10: watch main bottom
14: inventory select name
18: on default pickup
1C: interaction text (pick up, activate, open, etc.)
notes: fields not entered will use defaults for that object
can rename any item pickup (keys, weapons, etc)
can also be used with doors or other objects, such as when you try to open a locked door
---------------
26 lock door
used to target padlock and open doors. doors remain locked until first argument is destroyed
format:
00000026 yyyyyyyy xxxxxxxx 00000000
x object # before/after to locking object
y locked object # before/after
example:
00 00 00 26 FF FF FF FE FF FF FF FF 00 00 00 00
linking this lock:
01 00 00 03 00 3F 27 5B 01 00 00 08 00 00 00 02 ...
to these two linked doors:
01 00 00 01 00 B4 00 0A 40 00 00 00 00 00 80 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
00 00 00 01 00 00 F3 33 00 01 00 00 00 00 00 51
00 00 00 51 00 00 02 22 00 08 00 00 00 00 00 00
00 00 05 DC 00 00 00 03 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 01 00 B4 00 0B 40 00 00 00 00 00 80 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
FF FF FF FF 00 00 F3 33 00 01 00 00 00 00 00 51
00 00 00 51 00 00 02 22 00 08 00 00 00 00 00 00
00 00 05 DC 00 00 00 03 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
---------------
27 wheeled vehicles
117-119, 121, 12D-131
0x80 std. be sure to set flag
truck f/ dam:
00: 01 19 00 27 01 17 01 3D 20 02 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 04 0A 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
for movement...
06: preset must be part of a path
08: set to 0010xxxx
80: jal to action block
---------------
28 aircraft
011A-011D, 0123 (cars will work, just not properly...)
example:
00: 00 40 00 28 01 1C 00 1F 30 22 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
80: 00 00 04 2A 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0: 00 00 00 00
for prop motion:
08: set to 0010xxxx
80: rate of motion.
(it may also be possible to move them along a path...)
helicopter in cradle...
02 4C 00 28 01 1A 00 93 10 02 00 08 00 08 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
00 00 04 21 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
---------------
29
unknown
format:
00000029
---------------
2A normal glass
0068 - 006B specifically, as well some other objects. Defines the glass shatter effect
normal 0x80, although the 2xxx presets may require specific rotation...
example:
01 00 00 2A 00 68 27 10 04 00 0B 62 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
beaker
01 00 00 2A 01 36 00 C9 00 00 00 09 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
---------------
2B Safe
00FE only, + 0125 for safe door
std 0x80
example:
00: 01 00 00 2B 00 FE 27 59 00 02 01 E8 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
-safe door f/ bunker 2
01 00 00 01 01 25 00 4A 00 00 00 00 20 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 5A 00 00 03 E8 00 00 00 00 0F 5C
00 00 0F 5C 00 01 00 00 00 08 00 05 00 00 00 30
0F FF FF FF 00 00 00 10 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
alert that safe is locked (basic "door is locked" text override:
00 00 00 25 FF FF FF FF 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 74 65
00 00 00 00 00 00 00 00
1st item in safe (first 0x10):
01 00 00 08 00 CC 00 2B 00 00 00 08 00 00 00 00 ...
link object into safe
00 00 00 2C FF FF FF FF FF FF FF FC FF FF FF FD 00 00 00 00
2nd item in safe (first 0x10):
01 00 00 08 00 CC 00 2D 00 00 00 08 00 00 00 00 ...
link object into safe
00 00 00 2C FF FF FF FF FF FF FF FA FF FF FF FB 00 00 00 00
probably not safe specific, but when one silencer is picked up, both are
00 00 00 0E FF FF FF FE FF FF FF FC
3rd item in safe (first 0x10):
02 00 00 03 01 0E 00 2C 00 04 00 08 00 00 00 00 ...
link item into safe:
00 00 00 2C FF FF FF FF FF FF FF F7 FF FF FF F8 00 00 00 00
+ rename
00 00 00 25 FF FF FF FE 00 00 00 42 ...
---------------
2C Safe items
used to place items within a safe
format:
0000002C oooooooo xxxxxxxx yyyyyyyy 00000000
o objects forward/back to object placed within safe
x objects forward/back to safe object (00FE)
y objects forward/back to safe door (0125)
example, f/ bunker 2 safe:
00 00 00 2C FF FF FF FF FF FF FF FC FF FF FF FD 00 00 00 00
---------------
2D tank
0120 only!
0x80 std.
0xD8 assigns amount of tank ammo to recieve
tank on runway
00: 01 14 00 2D 01 20 00 2C 00 02 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0: 00 00 00 00 00 00 00 00 00 00 00 1E 00 00 00 00
C6: 2 bytes. set >0 for firing effect
D8: tank ammo, max=50 (0x32)
note: can not be used effectively multiplayer.
Will not assign clipping change and correct player assignment.
---------------
2E Cut-Scene Coordinates
sets coordinates and rotation for in/outro camera sequences
uses the same format as those 06 intro camera shots following object data
format:
00: 00 00 00 2E 00 0E 20 1F 00 01 0C F9 FF D5 75 25
10: 00 03 25 07 00 06 2D B0 00 00 27 14
04: x coordinate offset
08: y coordinate offset
0C: z coordinate offset
10: lateral rotation
14: vertical rotation
18: preset. used to illuminate the correct room.
note - any vertical rotation around 0006xxxx will be near the horizon.
---------------
2F Tinted Glass
sets opacity and visibility distance for tinted glass panels
format:
00: 01 00 00 2F 00 68 27 8A 10 00 02 62 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 03 E8 00 00 00 00 00 00 00 00 00 00
80: 00 00 01 90 00 00 02 58 00 00 00 00 FF FF FF FF
90: 00 00 00 00
80: +/- 4byte distance to full illumination
84: +/- 4byte distance before you can see through window
both distances use general model/clipping values.
The difference between the distances sets the fade for the glass.
setting a low first value and high second value makes a pane that gradually gets more visible.
setting the first value the same as the second will mean that once you reach the given distance the pane immediately becomes clear.
setting the first value negative can be used to make glass that never becomes visible. or only partially so.
---------------
30+ End Setup Object List
all invalid types indicate the end of the setup file
no arguments
format:
00000030
Ê
zoinkity
Joined: 24 Nov 2005
Posts: 25
ÊPosted: Thu Mar 23, 2006 8:42 amÊÊ ÊPost subject:
This explains clipping, as used in Citadel. On GE, only triangles and interspersed rectangles not coiding with a wall boundry can be concidered stable. In PD, however, they used incredibly huge polygons. (PD's format though differs significantly)
_________________________
Clipping:
each tile has a 8 byte header. each point uses 8 bytes
rom files start with a necessary header.
address for clipping file, stored in ram, always 000000000
offset in file to first tile
(you can insert more offsets here as notes or whatnot)
before first tile, 00000000
tile header format:
pp pp pp rr !- -- #- --
--values used within setup files to tie object positions to tiles. Not used in emulators, but it is read and probably used on console. The first two bytes are the equivelant of a decimal number. The last byte is a coded value.
00 a
01 a1
02 a2
03 a3
04 a4
05 a5
06 a6
07 a7
08 b
09 b1
0A b2
0B b3
0C b4
0D b5
0E b6
0F b7
etc...
ie:
0588 07
corresponds to:
p1416a7
These values should match the values in setup. If not, the object may not load in the correct room or at all.
[r]oom. When on this tile, this room is visible. Rooms follow reverse order and to be parsed correctly must be in room number order. If max rooms are 2E, then rooms follow 2E, 2D, 2C, 2B etc.
Multi-room visibility is handled in background data.
[!] special type value (first nibble of 5th byte). bit flags:
Normal tiles are 0, kneeling is 1, ladders are 2
ladders must be vertical or near vertical to function.
Although you can write a ladder + squatting (3), it really isn't recomended. It is too easy to get stuck.
[-] these values have no identifiable use.
[#] number of points in tile. Techincally the limit is 15, but a rom file will not parse correctly if more than 10 are used.
Do not use more than 3-4 points whenever possible. There are about a billion things that can go wrong with larger tiles, from incorrect assembly, bad file parsing, connection problems, and visibility errors. Only triangles are recomended to intersect a room junction.
[-] these three nibbles, as far as I can tell, are unread. They always add up to the number of points, and the files do tend to compress better when they're there, but otherwise they are useless.
points:
points follow counterclockwise, the last connecting to the first. With larger files, make sure you stick to regular polygon forms wherever possible to avoid a point connection issue.
xx xx yy yy zz zz cc cc
x,y,z positions are global values used in visibility windows and for setting room position. They are relative to the stage centerpoint and are scale independant.
[c]onnection values. All tiles are connected with these values. 0000 is no connection.
First tile offset is 0010. Each connection value counts the number of words from the first tile to the header of the tile you are connecting to. Each is relative to the first tile, so if you are creating/using a rom file ignore the header.
ie: 0401
4*(0401 - 10) = FC4 is the target tile address in file
end of table:
the table ends when one header reads 0. no points should follow.
This should be followed by the ASCI string "unstric", null terminated to nearest doubleword.
-Zoinkity
Ê
zoinkity
Joined: 24 Nov 2005
Posts: 25
ÊPosted: Thu Mar 23, 2006 8:46 amÊÊ ÊPost subject:
Global object visibility, as seen in background data.
For a nifty example of this, check out my Dam multiplayer. It disables the global visibility in the stage, decreasing skip rate.
easily the least helpful doc
_________________________________
types:
00010000 00000000 terminator
20020000 00000000 following rooms are lit
21010000 00000000 starts each group, ending prior
22020000 00000000 -and statement linking stuff
5A010000 00000000 ends point groups
5C010000 00000000 ends room pointer groups (1E, 1F)
65000000 000000## room number
common sequences:
14030000 00000000 65000000 000000#1 65000000 000000#2
5A010000 00000000
allows you to see a certain room from every room
number between #1 and #2. Can be set to same room
number too.
1E010000 00000000 5C010000 00000000 lights rooms without need for portals
1F020000 00000000 64000000 000000## room is visible
through this portal
22020000 """""""" """""""" """""""" and this one too
20020000 00000000 65000000 000000## make following
room visible to all entries prior.
You can just list a slew of these.
Might seem chaotic right now, but can write them.
Minimum would be: (... = 00000000)
21010000 ...
14030000 ... 65000000 000000## 65000000 000000##
5A010000 ...
1E010000 ...
5C010000 ...
20020000 ... 65000000 000000##
00010000 ...
Ê
zoinkity
Joined: 24 Nov 2005
Posts: 25
ÊPosted: Thu Mar 23, 2006 8:55 amÊÊ ÊPost subject:
All due credit to Sub on this one, since he figured out a lot of them. In fact, it really was mostly him ;*)
However, I'm releasing the info in case anyone actually wants to use it for anything, since we never really got around to it.
(GEMaster: this is what I used for that funny hack that guy wanted)
This is incomplete, and there's nothing to say it is accurate. However, the basics for the loops do work, and we've done some nifty (mostly silly) things with it
There's also a default guard routine outside the action blocks but I can't remember what address that was at. It's kinda fun really; I had scientists rigged up where shooting them made them put a hat on their head and they hopped like bunnies.
Also, there is nothing more deadly than a scientist with double grenade launchers. Nothing.
_____________________
Goldeneye
Item Types
if > 0x18 subtract 0x19
if < 0x25 ((0x25 - 0x19) << 2) + 80053654 (still end of table) (TLB pointers to jr)
80052100 table
Other type: (note: these are # of bytes, not words in other table)
00 2
00XX
XX = Return Value
Go into loop executing no commands but going through them until Return Value is met by 02XX Command or 04 is found and terminate
01 2
01XX
XX = Return Value
Return to start of block, Go into loop executing no commands but going through them until Return Value is met by 02XX Command or 04 is found and terminate
02 2
02XX
XX = Return Value
In main load (not in return loop), 02 does nothing. In the return loop, if current Return Value == XX, go to main load and start executing commands again.
03 1
04 1 terminate
05 4 jal; jump to block function with # after its pointer 05.ii.#### dentifier type (FD=guard, F8=Bond),[#] of thing to jump to. given after the pointer to the block data
also: 05 - 4 Default action for guard on the path (ex. walking wait for bond, attacking immediately, wait till bond shoots, etc), 00XX = bank at 80037450, 04XX = level specific, corresponding to table with pointers to spawn stuff
06 3 06.xxxx set return link to start of this block.
07 1 return to original function
08 1 some odd walking or foot-shuffling animation
09 1 kneel
0A 9
0AXXXXYYYYZZZZWWWW
XXXX = Animation offset into table (ex. swirling, running, holding gun, etc, sent list before)
YYYY ?
ZZZZ ?
WWWW = some sort of speed halfword, something like that
0B 2 0B.rr ?, return rr (bunker 1: 040D)
0C 1 stand still?
0D 1 look around self
0E 2 0E.rr step sideways, return rr (guard action)
0F 2 0F.rr hop sideways, return rr (guard action)
10 2 10.rr run sideways, return rr (guard action)
11 2 11.rr walk while firing, return rr (guard action)
12 2 12.rr run while firing, return rr (guard action)
13 2 13.rr roll along ground, then fire crouched, return rr (guard action)
14 6 14.xxxx.####.rr target guard [#], [r]eturn
15 6 15.xxxx.####.rr kneel targetting guard [#], [r]eturn
16 6 16.xxxx.####.rr stand (bond like) targetting guard [#], [r]eturn
17 6 17.xxxx.####.rr stand still facing guard [#] cordially, [r]eturn value (ie. valentine, mishkin)
guard ID#0000 is Bond.
values for x:
xx2x: aim, but don't fire
xxx1: used to pinpoint bond
xxx4: used to pinpoint guard ID#
xxx8: used to pinpoint preset
18 4 18.##.xxxx state set for object?
tagged to the statue helicopter: 18.00.0806
possibly unrelated... 18000808
19 4 19.##.xxxx unset state of object?
1A 2 1A.rr throw grenade, return rr (guard action)
1B 5 1B.xxxx.##.rr drop weapon: model [x], weapon inventory #, return rr
1B.xxxx.ww.rr if bond within x units, drop [w]eapon inventory #, return rr
(if grenade, mine, etc dropped, they are active and will explode!)
1C 3 1C.pppp jog to preset
1D 1 stop?
1E 3 1E.pppp walk to preset
1F 3 1F.pppp run to preset
20 2 Make path active 20XX XX = path designator from after each above path pointers
21 1 Surrender! guard throws down equipment, hands up, knees shaking!
22 1 fade away guard
23 2 23.## ?, guard ID#
24 4 24.xxxx.rr x - either preset or path preset (2328), return rr
25 1 sound alarm
26 1 shut off alarm
27 2
28 2 28.rr jog to bond. [r]eturns when at location
29 2 29.rr walk to bond. [r]eturns when at location
2A 2 2A.rr run to bond. [r]eturns when at location
2B 2
2C 3
2D 3
2E 3
2F 2 2F.rr if guard stopped moving (arrived at destination) return rr
30 3 30.##.rr if guard ID killed, return rr
31 3 31.xx.rr return value when bond in room with preset
32 2 32.rr if Bond within sight, return rr
33 1 Seed Random Byte
34 3 34.xx.rr if random < XX, continue to rr
35 3 35.xx.rr if random > XX, continue to rr
36 2
37 2 37.rr if alarm activated, return rr
38 2
39 2 39.rr if guard sees gunfire return rr
3A 2 3A.rr if you shoot another guard, return rr
3B 2 3B.rr if you kill someone in front of guard, return rr
3C 2 3C.rr if Bond in firing range, return rr
3D 2
3E 2 3E.rr if you shot guard, return rr
3F 2 3F.rr if heard bond, return rr
40 3
41 2 41.rr ?, return rr
42 2
43 2
44 4
45 2 45.rr ?, return rr
46 2 46.rr if you fired a bullet, return rr
47 3
48 3
49 3
4A 3
4B 4 4B.pppp.rr return if within
roximity of bond. guessing clipping units.
4C 4 4C.pppp.rr return if not within
roximity of bond
4D 7 4D.gg.xxxx.pppp.rr if [g]uard (FD) or Bond? (F within [x] units of
reset, [r]eturn value.
4E 7 4E.gg.xxxx.pppp.rr if [g]uard (FD) or Bond? (F not within [x] units of
reset, [r]eturn value.
4F 5
50 5
51 4
52 6 52.xxxx.####.rr when within [x] units of preset #, return rr
53 6 53.xxxx.####.rr when not within [x] units of preset #, return rr
54 5 54.##.xxxx.rr when guard ID# is at preset [x], return rr
55 4 if step on preset xxxx, return yy
56 3 collecting item; 56.oo.##; oo is number of type 16 to test, return##
57 3 57.ii.rr if tem was depositted, return rr
58 4 58.ii.##.rr if deposited nventory value on type 16#, return rr
59 3 59.##.rr if weapon value = ##, return rr (ie. 590133: if unarmed, return 33)
5A 3
5B 3 test if object not destroyed; 5B.##.rr; type 16[#] to test, [r]eturn
5C 3 test if object activated; 5C.##.rr; type 16[#] to test, [r]eturn
5D 3 use gadget on object; 5D.##.rr type16[#]
5E 2 5E.xx type 16#xx activates
5F 2 5F.xx detonate type 16#xx
60 2 60.xx Guard Drops type 16#xx
61 2
62 2
63 2 63.xx guard gives bond type16#xx item
64 3
65 4 65.##.xxxx move object to preset (16-object for plane, then preset)
66 2 open door with type 16#xx
67 2 close door with type 16#xx
68 4 68.##.ss.rr check tate of door type16#, [r]eturn if true.
states:
01: closed
02: open
04: closing
08: opening
69 3
6A 3 6A.##.xx change state of door type16#
values:
80: locked
01: locked
no clue how this works...
6B 3
6C 4
6D 3 6D.##.rr if objective number complete, return rr
6E 3 6E.##.rr ?, return rr
6F 3 6F.##.rr if objective number incomplete, return rr
70 3 if difficulty xx, return yy. 1=agent, 2=secret, 4=007
71 3 if not difficulty xx, return yy
72 4
73 4
74 4
75 4
76 3
77 3
78 3 78.xx.rr some sort of test (for presets?), return rr
79 3 79.xx.rr if shot guard ## times, return rr
7A 3
7B 3
7C 4 7C.##.xx.rr if guard ID#'s health above [x], return [r]
7D 4 7D.##.xx.rr if guard ID#'s health below [x], return [r]
7E 3 7E.##.rr ? - guard ID#, return rr - cradle (0413)
7F 3 7F.xx.rr if health below xx, return rr
80 3 80.xx.rr if health above xx, return rr
81 2
82 2
83 2
84 3
85 2
86 2
87 2 87.xx don't think it returns...
88 2
89 3
8A 2 8A.rr ?, return rr?
8B 3
8C 2
2 .BF - ?, no return. immediately before BF type in cradle (0401)
8E 2 8E.?? ; ? is number of spawned guard.
8F 3 8F.xxxx sets guard health
90 3 90.xxxx sets guard body armour amount
ie: blue beret = 0050
red beret = 003C
black beret = 0014
91 2 91.28 ?, not a return type; found in generic 0010
92 2 92.64 ?, not a return type; all three found in order in cradle 0410
93 2 93.32 sets animation speed?
94 2 94.## set byte
95 2 95.## unset byte
96 3 96.##.rr if set byte # true, return value?
97 3 97.##.tt guard ID# [t]ype change
types:
01: listen to commands?
04: ? - trev in cradle (040F)
80: scientist
98 3
99 4
9A 5 9A.xxxxxxxx Set Objective Bits
9B 5 9B.xxxxxxxx Unset Objective Bits
9C 6 9C.xxxxxxxx.rr Check if Objective Value, Return Loop if so
9D 5 9D.xxxxxxxx set Guard bits
9E 5 9E.xxxxxxxx unset guard bits
9F 6 9F.xxxxxxxx.rr if guard bits same, return rr
A0 6 A0.##.xxxxxxxx Set Tags for Guard ID#
A1 6 A1.##.xxxxxxxx UnSet Tags for Guard ID#
A2 7 A2.##.xxxxxxxx.rr if tags for guard ID# xxxxxxxx, return rr
guard tags:
00000001: ?-unset in cradle (041A)
00000002: sunglasses (where applicable)
00000010: invincible
00000020: ? - guards in dam (040D)
00000040: can shoot guards
00000200: ? - Twhere in cradle (0412)
00000400: ? - fall in cradle (041F)
00000800: standard clipping (allows him to handle ramps and stuff)
00001000: ? - jump part of dam
00002000: ? - jump part of dam
00004000: ? - set when trev falls in cradle (0418)
00008000: ? - set when trev starts attacking you (0418)
00010000: ? - cuba
00020000: ? - cuba
00080000: ? - trev in cradle (0408)
00100000: scientist
00400000: ? statue guards
A3 6 A3.##.yyyyyyyy set state of type 16#xx object yyyyyyyy
A4 6 A4.##.yyyyyyyy unset state of type 16#xx object yyyyyyyy
A5 7 A5.##.yyyyyyyy.rr if state of type 16#xx object yyyyyyyy, return rr
object tags:
00100000: uncollectable
00040000: visible?
00020000: invincible?
A6 6 A6.##.xxxxxxxx set flags for door tagged with type 16#
A7 6 A7.##.xxxxxxxx unset flags for door tagged with type 16#
A8 7 A8.##.xxxxxxxx.rr if flags [x] for door tagged with type 16[#] same, return rr
door tags:
10000000: locked
04000000:
00080000: invisible
A9 2
AA 3
AB 3 AB.xxxx set object to y coordinate of xxxx preset
AC 4 AC.##.xxxx Guard ID#. moves guards or sets spawn points...
AD 1 debug text or comments follow. ascii, terminated with 00. Must contain some text or will fail!
AE 1 reset loop counter and enable it (set 40 bit)
AF 1 reset loop counter
B0 1 disable loop counter (unset 40 bit)
B1 1 enable loop counter (set 40 bit)
B2 2 B2.rr if loop counter enabled, return rr (checks 40 bit)
B3 5 B3.xxxxxx.rr if cycle counter < value, return rr
B4 5 B4.xxxxxx.rr if cycle counter > value, return rr
B5 1 Show Timer
B6 1 Hide Timer (Silent Countdown)
B7 3 Set Timer X seconds (Doesn't show timer yet)
B8 1 Stop Timer
B9 1 Start Timer
BA 3 BA.xx.rr check if timer enabled(01) or disabled (00), return rr
BB 4 Detect if Timer Below Certain Point xxxx, return yy is true
BC 4 Detect if Timer Above Certain Point xxxx, return yy is true
BD C spawn guard bb.hh.pppp.aaaa.bbbbbbbb.rr ody, [h]ead, into path table(00=use actual preset number for spawn),
reset position (23xx for path table), ction,
BE B spawn guard... BE.bb.hh.tt.aaaa.00000000.rr (unused in bunker1)
[t]ype indicates current guard ID, bonds, etc...
flags:
00000001 sunglasses (when applicable)
00000002
00000010 scientist? can kill own?
BF 9 weapons BF.mmmm.WW.hh000000.rr [m]odel, [w]eapon inventory #, [h]and - 00 normal, 80=right+90=left for doubles, [r]eturn value if loaded okay
C0 8 hats C0.mmmm.00000000.rr [m]odel, [r]eturn value if loaded okay
C1 5 C1.##.xxxx.rr guard ID#, preset or action?, return rr
C2 3 lower display text (text bank values); C2.xxxx
C3 3 upper display text (text bank values); C3.xxxx
C4 4 C4.xxxx.yy sound effect: xxxx some other value yy
C5 5 C5.xxxx.yyyy audible range for preceeding sound effect, just like 2F glass
C6 6
C7 6 play continuous sound effect: C7.vvvv.ss.? [v]olume, ound, ?
C8 6
C9 2 C9.00 shut off sound
CA 5
CB 2 CB.## use path # used on dam truck.
CC 5 CC.xxxx.yyyy set speed for type 27 object; x is speed, y amount of time to reach full speed
CD 5 CD.xxxx.yyyy set speed [x] of aircraft rotor (plane prop, etc.)
CE 2 "Detect if Currently in Intro Camera", return if so
CF 2 "Detect if Currently in Intro Swirl", return if so
D0 4 D0.##.ii.aa change type16# monitor nimation to aa. mage slot to be replaced is set here (for 0B multi image monitors)
D1 2
D2 1 exit level
D3 1 Return from Camera scene, Careful Everything is Reset
D4 3
D5 6 Go to camera position D5XX?..XX = 16-object for camera, unknown ??s, didn't see effect. Can do at any time.
D6 4 D6.yyyy.rr at elevation y return rr (uses clipping values methinks)
D7 2 D7.xx 00-disable text boxes. 01-enable text boxes
D8 1 ? cradle falling...
D9 5 D9.##.xxxx.rr guard ID#(or FD for current) moved to preset. return when true
DA 1 fade out for cut-scene
DB 1 fade in from black (reset for DA type)
DC 2 DC.rr return when fade is complete
DD 1 Remove Guards (they're just gone, no firing, nothing, including Bond image)
DE 1 Bring Guards Back
DF 2 DF.## open type 16# door. used in cutscenes
E0 3 E0.##.00 hide weapon? on guard ID - guard ID draws weapon
E1 3
E2 4
E3 2 E3.ww draw weapon type (1st person)
E4 2 E4.ww draw weapon type (3rd person)
E5 3 E5.xxxx set bond's speed (continues in last used direction)
E6 5
E7 2
E8 2
E9 1
EA 1 On Key Press, Fade out and Exit Level.
EB 2 EB.xx on Key-Press, return xx
EC 1 disable player control
ED 1 hide 1st person display (left hand, weapon etc)
EE D cuba circular camera
EE.xxxx.yyyy.zzzz.uuuu.vvvv.wwww
x: lateral distance away from bond
y: vertical distance from bond
z: rate of spin
u: preset used as focus point for angle
v: offset to y axis, relative to preset
w: inital rotation, relative to preset
(because the camera focuses directly on the preset, v and w offset the camera's focus relative to the preset. It is as though you moved the preset itself that much. x and y set the camera's distance from the preset while focusing on the point.)
EF 1 trigger cuba credit text
F0 2 F0.rr used in cuba...
F1 2 F1.rr if objectives complete, return rr
F2 3 F2.##.rr if guard ID# loaded, return rr
F3 2 F3.rr if guard loaded return rr
F4 4 F4.mm.xx.dd play music [M]usic or 0 for stage x-theme, x=volume?, [D]uration (FF for infinate)
bunker 1 - F4.003C4B
F5 2
F6 1 Trigger Explosions Around Bond (like plastique detonate)
F7 3 counts scientists who are dead F7.##.rr
F8 3 F8.##.rr ?, guard ID#, return rr - cradle (0413)
F9 1 ? cradle cutscene 041C
FA 1
FB 1 darken stage (or does is switch to x-sky?)
FC 2
FD not valid, end of table
for all types that use guard ID:
F8 is bond
F9... used to indicate bond but unsure what feature...
FD is current guard (one calling routine, if applicable)
FC... used to indicate guard but unsure feature...
Ê
zoinkity
Joined: 24 Nov 2005
Posts: 25
ÊPosted: Thu Mar 23, 2006 9:03 amÊÊ ÊPost subject: There isn't a rule against Quad posting
I'm silly. Here's the default guard routines, plus their ID's and a breakdown of how they work. Most are different actions randomly selected from when bond is detected, such as roll around, run to him, and the ever so lovely walk and fire. A couple are also dedicated to handling double weapon guards, but otherwise copy single weapon ones.
By setting the offsets listed at the end of the file you can severly mess with guard activity. Cool, but dangerous. (yes, you really can make an infinate loop!)
Thanks ahead of time to GEMaster for not torturing me over posting all this stuff ;*) Squee!
________________________
0000: 80037070
